How To Replace A Bathroom Sink
Disconnect the water supply. The water mixes with any water from the hot side and then comes out the spigot.
How To Replace A Bathroom Sink How To Replace Bathroom Sink Faucet
To avoid burns use pliers to remove the hot valve.
How to replace a bathroom sink. To attach the faucets to the sink we remove the handles from the valves. Step 3 supply lines. If youre replacing a sink youll obviously need to remove the sink thats in place before installing the new one.
Remove the top bezel and install the valve from the underside of the sink. Here are the diy basics for replacing a bathroom sink. Disconnect the supply and drain lines from the faucet using locking pliers or a crescent wrench.
Unscrew the drainpipe nut and remove the p trap. Test the lift rod. Install the drain rod next.
Emptying and removing the cabinet drawers makes this step easier. For pipes with soldered valves heat the junction with a propane torch to melt the solder and remove the valve. We needed to replace our bathroom sink whose ceramic enamel was worn off so we made this how to video on installing a drop in bathroom sink.
To install it clean the pipe and then simply push the valve onto the pipe. Remove the sink and plumbing. Screw the bezel back onto the valve.
Unscrew the pivot nut on the drain body insert the horizontal rod through the hole in the stopper and replace the nut. Place a container beneath it to catch any residual water. Detach the sink plumbing and water supply.
Remove the faucet and drain from the old sink if you plan to use it in your new sink. A step by step tutorial video showing you how to remove an old bathroom sink faucet and install a new one. Not terribly hard but its nice to see before you try it for the 1st time yourself.
Be careful to keep the heat away from the wall and other flammable objects. Use a wrench to disconnect the lines at the spigot. Install the old faucet and drain on the new sink.
A small amount of water may leak out when you do this which is normal. Push the horizontal rod down and secure the lift rod to the strap with the screw. Remove the old sink if necessary.
Be sure to apply a bead of silicone caulk to the faucet and drain base. Before replacing the drop in bathroom sink it is also important to drain the water in the supply lines. To install a new sink you should seal the hardware.
The water will automatically flow out.
Replace Bathroom Sink Drain How To Remove Drain Plug Replacing
How To Replace A Bathroom Sink Cheap How To Replace Bathroom Sink
0 Response to "How To Replace A Bathroom Sink"
Post a Comment